Simple and Reliable Fabrication Method for Polydimethylsiloxane Dielectric Elastomer Actuators Using Carbon Nanotube Powder Electrodes
Ardi Wiranata, Yasuyuki Ishii, Naoki Hosoya, Shingo Maeda
Universitas Gadjah Mada Shibaura Institute of Technology
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Dielectric elastomer actuators (DEAs) are energy efficient, compact, and operate silently. DEAs consist of an elastomer membrane sandwiched between two stretchable electrodes. Optimizing the quality of both the elastomer and the stretchable electrodes is essential to improve the DEAs performance. Herein, novel strategies are reported to achieve fast, reliable, and low‐cost fabrication of DEAs. The strategies utilize a soft brush to directly pattern carbon nanotube (CNT) powder on the elastomer membrane and tune the mechanical and surface‐adhesiveness characteristics of a polydimethylsiloxane (PDMS) membrane by altering the mixing ratio of the curing agent and base polymer. A uniaxial engineering tensile test on PDMS indicates that a softer material is formed when less curing agent is used. The softer PDMS has a sticky surface, which allows the CNT powder to be physically bound to the surface. Field‐emission scanning electron microscopy (FE‐SEM) images prove that the strong CNT network is formed on the surface of the elastomer. The electromechanical investigation also indicates that the electrical conductivity is improved for a stickier PDMS surface. The optimal performance of PDMS 30‐1 in static and cyclic DEA tests shows that the brushing of CNT combined with soft and sticky elastomer membranes can increase the DEA performance.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
材料 / 化学Dielectric materials and actuators
Advanced Sensor and Energy Harvesting Materials · Advanced Materials and Mechanics
参考文献 28
此处列出前 3 条
引用本文 47
按被引量排序,此处列出前 3 条