Interpenetrated Gel Polymer Binder for High‐Performance Silicon Anodes in Lithium‐ion Batteries
Jiangxuan Song, Mingjiong Zhou, Ran Yi, Terrence Xu, Mikhail L. Gordin, Duihai Tang, Zhaoxin Yu, Michael Regula 等 9 位
Pennsylvania State University Ningbo University
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Silicon has attracted ever‐increasing attention as a high‐capacity anode material in Li‐ion batteries owing to its extremely high theoretical capacity. However, practical application of silicon anodes is seriously hindered by its fast capacity fading as a result of huge volume changes during the charge/discharge process. Here, an interpenetrated gel polymer binder for high‐performance silicon anodes is created through in‐situ crosslinking of water‐soluble poly(acrylic acid) (PAA) and polyvinyl alcohol (PVA) precursors. This gel polymer binder with deformable polymer network and strong adhesion on silicon particles can effectively accommodate the large volume change of silicon anodes upon lithiation/delithiation, leading to an excellent cycling stability and high Coulombic efficiency even at high current densities. Moreover, high areal capacity of ∼4.3 mAh/cm 2 is achieved based on the silicon anode using the gel PAA–PVA polymer binder with a high mass loading. In view of simplicity in using the water soluble gel polymer binder, it is believed that this novel binder has a great potential to be used for high capacity silicon anodes in next generation Li‐ion batteries, as well as for other electrode materials with large volume change during cycling.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Advancements in Battery Materials
Advanced Battery Materials and Technologies · Battery Modeling and Management