Bioinspired SiC/Chitosan Impact Resistant Coatings
Taige Hao, Wei Dong Huang, Nicolás Guarín‐Zapata, Derek Lublin, Yu Chen, Haitao Yu, Loukham Shyamsunder, Pablo Daniel Zavattieri 等 9 位
University of California, Irvine Purdue University West Lafayette Universidad EAFIT
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Routine high strain rate impacts from the surrounding environment can cause surface erosion, abrasion, and even catastrophic failure to many structural materials. It is thus highly desirable to develop lightweight, thin, and tough impact resistant coatings. Here, inspired by the structurally robust impact surface of the dactyl club of the peacock mantis shrimp, a silicon carbide and chitosan nanocomposite coating is developed to evaluate its impact resistance as a function of particle loading. High strain rate impact tests demonstrate that coatings with 50% and 60% SiC have optimal performance with the greatest reduction in penetration depth and damage area to the substrate. Post‐impact analysis confirms that these concentrations achieve a balance between stiffness and matrix phase continuity, efficiently dissipating impact energy while maintaining coating integrity. The addition of SiC particles helps dissipate impact energy via interphase effects, particle percolation, and frictional losses due to particle jamming. The formation of these stress paths is also modeled to better understand how the addition of particles improves coating stiffness and the stress distribution as a function of particle loading. These findings highlight the potential of bioinspired materials and their promise to promote innovation and breakthroughs in the development of resilient multifunctional materials.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
材料 / 化学Calcium Carbonate Crystallization and Inhibition
High-Velocity Impact and Material Behavior · Erosion and Abrasive Machining