Graft Copolymer‐Stabilized Liquid Metal Nanoparticles for Lithium‐Ion Battery Self‐Healing Anodes
Youngwoo Seo, HoYeon Kim, Guangtao Zan, Myeong‐Jun Song, Chanho Park, Jin Woo Oh, Young Hwan Kim, Song‐Gue Choi 等 13 位
Yonsei University Northwestern University Samsung (South Korea) Samsung Electronics (South Korea)
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
The use of eutectic gallium indium (EGaIn) liquid metal alloy as anodes for lithium‐ion batteries (LIBs) has been extensively studied owing to its shape‐deformable and self‐healing properties. However, to limit the damage to EGaIn anodes resulting from volume expansion during lithiation and delithiation, chemical modifications are required to stabilize the liquid metal as nanoparticles. This study introduces a novel self‐healing liquid metal anode with grafted polymer ionic channels to enhance the stability and rate capability of LIBs. The fluorinated polymer binder grafted with ionomers effectively suppresses liquid metal aggregation, stabilizing the liquid metal nanoparticles. Additionally, the fluorinated polymer binder provides ionic channels that facilitate lithium‐ion migration from the electrolyte to the surfaces of the liquid metal nanoparticles. The efficient electrochemical reduction of lithium ions on these surfaces results in high‐performance LIBs, which is demonstrated by the improved stability (85% retention after 500 cycles at 0.5 A g −1 ), rate capability (45.1% at 2.0 A g −1 ), and cell capacity (803.7 mAh g −1 at 0.1 A g −1 ). Anodes containing the grafted copolymer to stabilize the liquid metal nanoparticles can be scaled using simple solution processes, providing an effective strategy for developing high‐performance liquid metal‐based LIBs.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Advancements in Battery Materials
Advanced Battery Materials and Technologies · Battery Modeling and Management