A One‐Step Fabricated Sheath‐Core Stretchable Fiber Based on Liquid Metal with Superior Electric Conductivity for Wearable Sensors and Heaters
Xichen Yu, Wei Fan, Yang Liu, Kai Dong, Shujuan Wang, Wei‐Chun Chen, Yao Zhang, Linlin Lu 等 10 位
Xi'an Polytechnic University Chinese Academy of Sciences Beijing Institute of Nanoenergy and Nanosystems Xi'an Jiaotong University
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Conductors with high conductivity and stretchability are the crucial components of smart wearable electronics. However, most of the reported conductors have disadvantages of single function, high energy consumption, which seriously limit their application in wearable electronics. Here, a kind of stretchable (up to 373%), highly conductive (the same order of magnitude as commercial metal wire), and multifunctional sheath‐core fibers based on liquid metal that can be continuously fabricated in large quantity through a coaxial wet‐spinning process are reported. The simple preparation method of the fibers can realize continuous and mass production (1 m min–1 in the laboratory). When the fibers are used as an electric heater, the temperature can reach 58 °C at 0.6 V and the heating rate is obviously faster than the ambient temperature under infrared light. When the fibers are used as a wearable sensor, the tiny force of 0.001 cN can be detected and objects at less than 40 cm can be detected without contact. The stretchable fibers with high electric conductivity may provide strong supports for the commercialization of wearable electronics and pave the way toward full‐fledged multifunctional wearable sensors.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Advanced Sensor and Energy Harvesting Materials
Nanomaterials and Printing Technologies · Icing and De-icing Technologies