A Plug‐and‐Play Volume Minimizing Micromixer
Kirill Kolesnik, Philipp Segeritz, Daniel J. Scott, David J. Collins
The University of Melbourne Florey Institute of Neuroscience and Mental Health
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Microscale fluid mixing has numerous applications where rapid and efficient mixing is required, including drug discovery, bio-analysis and point-of-care diagnostics. Conventional soft lithography processes, however, make the integration of robust and reliable mixing difficult to implement in practice, especially across different flow rates. Here a 3D-printed plug-in micromixer designed for rapid and modular integration with microfluidic devices that addresses long-standing integration challenges for micromixing in microfluidic devices is presented. The micromixer is based on the split-and-recombine (SAR) channel topology employing an optimized 3D geometry, minimizing internal volume and fluidic resistance. A micromixer with 60-µm internal channels is fabricated and experimentally tested, demonstrating efficient mixing while maintaining a reliable seal with a PDMS microfluidic device. Accordingly, the modular micromixing device enhances the efficiency and usability of microfluidic systems, offering a promising solution for biomedical and analytical applications. This conceptually elegant plug-in approach represents a unique advance in the practical integration of 3D printed functionality with microfluidics devices.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Microfluidic and Capillary Electrophoresis Applications
Innovative Microfluidic and Catalytic Techniques Innovation · Microfluidic and Bio-sensing Technologies