Strategic Pore Architecture for Accommodating Volume Change from High Si Content in Lithium‐Ion Battery Anodes
Jiyoung Ma, Jaekyung Sung, Yoonkwang Lee, Yeonguk Son, Sujong Chae, Namhyung Kim, Seong‐Hyeon Choi, Jaephil Cho
Ulsan National Institute of Science and Technology University of Cambridge Pacific Northwest National Laboratory Hyundai Motor Group (South Korea)
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
To be a thinner and more lightweight lithium‐ion battery with high energy density, the next‐generation anode with high gravimetric and volumetric capacity is a prerequisite. In this regard, utilizing high silicon (3579 mAh g−1) content in the electrode for the anode has been highlighted as a practically relevant approach. However, there still remains a crucial issue related to intrinsic volume expansion (>300%) of silicon upon lithiation, which can directly affect severe electrode swelling as well as accelerate its capacity fading by triggering structural degradation and electrical contact loss between particles. Herein, macropore‐exploited design, which can accommodate the volume change of high silicon content within the extended pore of graphite upon repeated cycling, is introduced. Such unique macropore‐exploited design leads to much less electrode swelling, by preserving its morphological integrity and contact between particles, than that of the comparative group with different sized pore and silicon distribution. As a result, this anode (914 mAh g−1) demonstrates notable gravimetric (220 Wh kg−1 at 6000 W kg−1) and volumetric energy density (623 Wh L−1 upon full lithiation after 100 cycles), exceeding that of a nano‐silicon blended graphite anode (127 Wh kg−1 and 229 Wh L−1) in the full‐cell system.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Advancements in Battery Materials
Battery Modeling and Management · Supercapacitor Materials and Fabrication