Solvation‐Shell Engineering Enables Additive‐Dominated Coordination for Stable Silicon Anodes Under Minimal Salt Conditions
Zhenhui Liu, Yulin Zhang, Shizhu Wang, Jianwei Xiong, Tian Gao, Ruohan Yu, Zhenming Xu, Xuanning Chen 等 13 位
Nanjing University of Aeronautics and Astronautics Wuhan University of Technology Yangzhou University Fudan University
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Constructing a stable solid electrolyte interphase (SEI) is essential for enabling high‐capacity alloying anodes in next‐generation lithium‐ion batteries (LIBs). However, conventional strategies based on high salt concentrations or expensive additives are limited by high cost, viscosity, and poor compatibility. Herein, we develop a solvation engineering strategy to increase the coordination number of additive molecules in the Li⁺ solvation shell by minimizing anion participation. A low‐salt electrolyte composed of 0.2 M LiFSI (LiPF 6 ) in DMM/THF/FEC (4:3:3 by vol%) enables additive‐dominated coordination and facilitates the formation of a uniform, fluorine‐rich SEI. Characterizations including molecular dynamics simulations, spectroscopy, and 3D electrode reconstruction confirm this tailored solvation environment stabilizes the Si interface and mitigates volume‐induced degradation. As a result, silicon anode exhibits a specific capacity of ∼2000 mAh g −1 over 200 cycles, while graphite anodes retain 96% capacity after 500 cycles. Stable cycling performances can also be achieved in different pouch cells. This work underscores the critical importance of additive coordination control in electrolyte design and provides a broadly applicable, cost‐effective strategy for advancing alloy‐type anodes in practical LIB systems.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Advancements in Battery Materials
Advanced Battery Materials and Technologies · Battery Modeling and Management