Synergistic Effects of Surface Coating and Bulk Doping in Ni‐Rich Lithium Nickel Cobalt Manganese Oxide Cathode Materials for High‐Energy Lithium Ion Batteries
Friederike Reißig, Martin Lange, Lukas Haneke, Tobias Placke, Wolfgang G. Zeier, Martin Winter, Richard Schmuch, Aurora Gomez Martin
Forschungszentrum Jülich Helmholtz-Institute Münster Johannes Gutenberg University Mainz University of Münster
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Ni‐rich layered oxide cathodes are promising candidates to satisfy the increasing energy demand of lithium‐ion batteries for automotive applications. Thermal and cycling stability issues originating from increasing Ni contents are addressed by mitigation strategies such as elemental bulk substitution (“doping”) and surface coating. Although both approaches separately benefit the cycling stability, there are only few reports investigating the combination of two of such approaches. Herein, the combination of Zr as common dopant in commercial materials with effective Li2WO4 and WO3 coatings was investigated with special focus on the impact of different material processing conditions on structural parameters and electrochemical performance in nickel‐cobalt‐manganese (NCM) || graphite cells. Results indicated that the Zr4+ dopant diffusing to the surface during annealing improved the electrochemical performance compared to samples without additional coatings. This work emphasizes the importance to not only investigate the effect of individual dopants or coatings but also the influences between both.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Advancements in Battery Materials
Battery Modeling and Management · Advanced Battery Materials and Technologies