Phase and amplitude error indices for error quantification in pseudodynamic testing

SUMMARY Real‐time pseudodynamic (PSD) and hybrid PSD testing methods are displacement controlled experimental techniques that are used to investigate the dynamic behaviour of complex and load rate‐dependent structures. Because the imposed command displacements are not predefined but generated during the test based on measured feedback, these methods are inherently prone to error propagation, which can affect the accuracy and even the stability of the entire experiment. As a result, to have these experimental methods as reliable tools, the accuracy of the test results needs to be assessed by carefully monitoring, and if possible, quantifying the errors involved. In this paper, phase and amplitude error indices (PAEI) are introduced to identify the experimental errors through uncoupled closed‐form equations. Unlike the indicators that have been previously introduced in the literature for error identification purposes, PAEI do not use test setup specific parameters in their formulation, and can quantify the errors independent of the amplitude of the command displacements. As such, PAEI can be used as standard tools for assessing the quality of the experiments performed in different laboratories or under different conditions. Additionally, because they can quantify the error, when implemented online, PAEI have the potential to be incorporated in the control law and thereby improve the actuator control during the tests. The formulation and implementation of PAEI are provided in this paper. The enhanced performance of the proposed indices is demonstrated by processing several different measured and command signals using PAEI and comparing the results with those revealed by the previous indicators. Copyright © 2011 John Wiley & Sons, Ltd.