Fabrication of pressure visual fiber based on liquid metal control thermochromic pigments
Huabing Wang, Xinyan Yue, Xiuyu Shen, Xianlin Wang, Riquan Zheng, Qinghe Han, Xiaoqiang Li, Yang Jin
Jiangnan University Shaoxing University
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
In this study, pressure visual fibers (PVF) with a core‐shell structure were prepared using a coaxial wet spinning process. The fiber composite shell consists of a luminescent material (as a light source) and a thermochromic pigment (as a filter light source) mixed with a polyacrylonitrile (PAN) matrix. The fiber core layer, on the other hand, was made of gallium‐indium alloy liquid metal. In operation, the filter light source is activated by joule heat drive (resulting in the fading of the thermochromic pigment), and the PVF releases phosphorescence upon exposure to ultraviolet light. When a certain pressure is applied to the fiber shell, the liquid metal in the core layer is squeezed, resulting in a local cross‐sectional area reduction, an increase in local joule thermal power, and thus local discoloration. This localized compression, in combination with a small rated current and the presence of an ultraviolet light source, converts the mechanical force (strain and compression) into an optical response. The excellent electrical conductivity of the liquid metal, combined with its compatibility with the soft matrix, makes it a promising candidate for applications in smart textiles and flexible sensing. Highlights The technology of visual fiber controlled by current is presented. The bendability and controllability of visual composites are improved. The composite fiber can be visualized when stressed.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Advanced Sensor and Energy Harvesting Materials
Advanced Materials and Mechanics · Liquid Crystal Research Advancements
参考文献 44
此处列出前 3 条
引用本文 5
按被引量排序,此处列出前 3 条