Influence of Surface Modification of Silica on Curing and Mechanical Properties of Silica‐Filled Rubber Compounds
Yuanhong Zhang, Zhongchao Wu, Na Wang, Zhibo Li
Qingdao University of Science and Technology
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
An in‐depth understanding of surface modification of silica is critical for the development of high‐performance green tires. In this work, silica was modified either with the silane coupling agent bis‐(3‐triethoxysilylpropyl)‐tetrasulfide (TESPT) alone, or with a synergistic combination of TESPT/n‐octyltriethoxysilane (OTES) and TESPT/hexamethyldisilazane (HMDS). TESPT‐modified silica samples with varying degrees of surface modification were prepared, and the dual modification system achieved a higher degree of hydrophobicity than TESPT alone. Results indicated that surface grafting of silica significantly reduced curative adsorption, with N,N ′‐diphenylguanidine (DPG) exhibiting higher adsorption than N‐cyclohexyl‐2‐benzothiazolesulfenamide (CBS); TESPT in combination with modifier led to a decrease in DPG adsorption. The effects of such silica surface grafting on the cure characteristics of solution styrene‐butadiene rubber (SSBR) compounds and the mechanical properties of the resulting vulcanizates were systematically investigated. Enhanced surface modification led to increased total and chemical crosslink density, attributed to suppressed curative adsorption along with improved filler dispersion. Based on these findings, the effects of filler surface modification on the physical properties of the vulcanizates were further discussed and compared. Overall, the cure behavior and mechanical properties of silica‐filled rubber compounds are strongly influenced by the surface chemistry of silica.
逐年被引趋势
暂无年度引用数据
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
材料 / 化学Polymer Science and Applications
Polymer Nanocomposites and Properties · Silicone and Siloxane Chemistry