Acetylation of cellulose I and II studied by limiting viscosity and X‐ray diffraction
R. E. Glegg, D. F. Ingerick, R. Reid Parmerter, J. S. T. Salzer, R. S. Warburton
Carestream (United States) Kodak (United States)
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
When cellulose triacetates and some hydrolyzed acetates are boiled in 2.5Nhydrochloric acid there is no residue. Under the same conditions cellulose is hydrolyzed, and a residue is obtained with a limiting viscosity that is related to the average length of the cellulose crystallites. These findings are combined to develop a method for studying the progress of acetylation through the amorphous portion of cellulose and into the crystallites, and to investigate the relative reactivities of cellulose I and cellulose II. Acetates were made from cotton and wood cellulose by a “fibrous” (heterogeneous) esterification involving sulfoacetic acid or perchloric acid catalyst in acetic acid‐acetic anhydride; the final acetyl contents (10–41%) were attained by stopping the reaction at various points short of the triester (rather than by hydrolyzing a triester). When these acetates were boiled in 2.5NHCI they did not disappear completely, and the residues were cellulose I, indicating that cellulose acetate had been removed. With increasing acetyl the yield of residue decreased, and beyond about 33% acetyl the viscosity and x‐ray measurements showed that the length and width of the crystallites decreased. However, when a nonsolvent such as toluene was added to the acetylation medium, the limiting viscosity did not change over the same acetyl range (up to 40%). Samples of varying acetyl values were taken during a regular acetylation of cotton linters in a mixer with sulfuric acid catalyst. X‐ray studies of the residues obtained by boiling the acetates in 2.5NHCI revealed the presence of unreacted cellulose I even after 40% acetyl had been reached. This explains why the manufacture of cellulose esters from cellulose I requires complete esterification before they are hydrolyzed to the desired acetyl level. It was shown that there is a distinct difference between the acetylation reactivity of cellulose I and cellulose II. This indicates the importance of avoiding cellulose II formation during the refinement of cellulose for the manufacture of cellulose acetate in a process involving activation with acetic acid.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
材料 / 化学Advanced Cellulose Research Studies
Polysaccharides and Plant Cell Walls · Lignin and Wood Chemistry