Structure and extinction of counterflow diffusion flames above condensed fuels: Comparison between poly(methyl methacrylate) and its liquid monomer, both burning in nitrogen–air mixtures

Since poly(methyl methacrylate) is known to depolymerize largely to its monomer when heated, the chemical kinetics in the gaseous diffusion flame produced by this polymer in a fire may coincide with that of burning liquid methyl methacrylate. To test this hypothesis, flat diffusion flames were probed and extinguished adjacent to surfaces of each of these fuels. Profiles of temperature and of concentrations of stable chemical species are reported, as are gas velocities of approach flow required to produce extinction for various oxygen/nitrogen ratios of the stream. Results revealed structural differences attributable to differing thermal properties of the fuels. Many fuel species were observed in the gas phase, their profiles being partially rationalized on the basis of a suggested decomposition mechanism for gaseous methyl methacrylate. Overall kinetic parameters for gasphase combustion, obtained by use of extinction results in a previously developed theory, are nearly the same for the polymer and monomer but appear to differ by amounts exceeding experimental uncertainties. It is suggested that this may be traced to small differences in fuel species leaving the condensed phase which, for the polymer, is covered by a thin, two‐phase region.