Mechanically Ultra‐Robust, Elastic, Conductive, and Multifunctional Hybrid Hydrogel for a Triboelectric Nanogenerator and Flexible/Wearable Sensor

Flexibility/wearable electronics such as strain/pressure sensors in human–machine interactions (HMI) are highly developed nowadays. However, challenges remain because of the lack of flexibility, fatigue resistance, and versatility, leading to mechanical damage to device materials during practical applications. In this work, a triple‐network conductive hydrogel is fabricated by combining 2D Ti 3 C 2 T x nanosheets with two kinds of 1D polymer chains, polyacrylamide, and polyvinyl alcohol. The Ti 3 C 2 T x nanosheets act as the crosslinkers, which combine the two polymer chains of PAM and PVA via hydrogen bonds. Such a unique structure endows the hydrogel (MPP‐hydrogel) with merits such as mechanical ultra‐robust, super‐elasticity, and excellent fatigue resistance. More importantly, the introduced Ti 3 C 2 T x nanosheets not only enhance the hydrogel's conductivity but help form double electric layers (DELs) between the MXene nanosheets and the free water molecules inside the MPP‐hydrogel. When the MPP‐hydrogel is used as the electrode of the triboelectric nanogenerator (MPP‐TENG), due to the dynamic balance of the DELs under the initial potential difference generated from the contact electrification as the driving force, an enhanced electrical output of the TENG is generated. Moreover, flexible strain/pressure sensors for tiny and low‐frequency human motion detection are achieved. This work demonstrates a promising flexible electronic material for e‐skin and HMI.