MXene‐Sponge Based High‐Performance Piezoresistive Sensor for Wearable Biomonitoring and Real‐Time Tactile Sensing
Qikun Wei, Guorui Chen, Hong Liang Pan, Zongbiao Ye, Christian Au, Chunxu Chen, Xun Zhao, Yihao Zhou 等 14 位
University of Electronic Science and Technology of China State Key Laboratory of Electronic Thin Films and Integrated Devices University of California, Los Angeles Sichuan University
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Electrode microfabrication technologies such as lithography and deposition have been widely applied in wearable electronics to boost interfacial coupling efficiency and device performance. However, a majority of these approaches are restricted by expensive and complicated processing techniques, as well as waste discharge. Here, helium plasma irradiation is employed to yield a molybdenum microstructured electrode, which is constructed into a flexible piezoresistive pressure sensor based on a Ti 3 C 2 T x nanosheet‐immersed polyurethane sponge. This electrode engineering strategy enables the smooth transition between sponge deformation and MXene interlamellar displacement, giving rise to high sensitivity (1.52 kPa −1 ) and good linearity ( r 2 = 0.9985) in a wide sensing range (0–100 kPa) with a response time of 226 ms for pressure detection. In addition, both the experimental characterization and finite element simulation confirm that the hierarchical structures modulated by pore size, plasma bias, and MXene concentration play a crucial role in improving the sensing performance. Furthermore, the as‐developed flexible pressure sensor is demonstrated to measure human radial pulse, detect finger tapping, foot stomping, and perform object identification, revealing great feasibility in wearable biomonitoring and health assessment.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Advanced Sensor and Energy Harvesting Materials
MXene and MAX Phase Materials · Non-Invasive Vital Sign Monitoring