Surface Reconstruction of Ni‐Rich Layered Cathodes: In Situ Doping versus Ex Situ Doping
Linzhe Wang, Jian Qin, Zhimin Bai, Huaming Qian, Yanyan Cao, Hirbod Maleki Kheimeh Sari, Yukun Xi, Hui Shan 等 14 位
China University of Geosciences China University of Geosciences (Beijing) Xi'an University of Technology
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
The structural instability and sluggish Li+ diffusion kinetic of the nickel‐rich LiNixCoyMn1−x−yO2 (NCM) cathode still hinder its further commercialization for lithium‐ion batteries. Doping heteroatoms are widely studied as an effective strategy to maintain structural and thermal stability for improving the capacity retention of NCM during cycling. Herein this work, in situ Zn2+‐doped NCM (in situ Zn‐NCM) is successfully designed by atomic layer deposition (ALD) combined with annealing. In comparison to ex situ Zn2+‐doped NCM (ex situ Zn‐NCM), in situ Zn‐NCM can better enhance the layered structure stability and reduce the generation of surface defects due to that it has lower migration energy barrier and more uniform distribution of heteroatoms. As a result, at a high cutoff voltage of 4.5 V, in situ Zn‐NCM with the obvious advantages of lower cation mixing, better phase transition stability, as well as more efficient charge transfer displays higher reversible capacity (i.e., 203.2 mAh g−1 at 50 mA g−1) and initial Coulombic efficiency (85%) compared to ex situ Zn‐NCM and the pristine NCM. Therefore, in situ doping is a novel and universal strategy to enhance battery performance of high‐energy‐density NCM cathodes for lithium‐ion batteries.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Advancements in Battery Materials
Battery Modeling and Management · Advanced Battery Materials and Technologies