Out‐of‐plane flexural behavior of full precast concrete hollow‐core slabs with lateral joints
Qing Jiang, Kun Zhang, Yulong Feng, Xun Chong, Hanqin Wang, Yixiong Lei, Junqi Huang
Hefei University of Technology
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
This paper proposed a new lateral joint to connect precast concrete hollow‐core slabs (PCHSs) and increase their structural assembly efficiency. The main sensitive parameters are the longitudinal ribs and the number of proposed joints. Out‐of‐plane bending performance tests were conducted on four PCHSs with lateral joints (PCHS‐LJs) to study the effects of the main sensitive parameters on the mechanical properties and failure modes of the PCHS‐LJs. The test results showed that there is no obvious relative slip in the joints between the precast bottom slab and the upper post‐pouring concrete before PCHS‐LJs reaching the ultimate load. The transverse directions of PCHS‐LJs are the main force bearing directions and the cracks are mainly occurred in the longitudinal direction of the specimens, which is similar to the stress characteristics of one‐way slabs. Moreover, the vertical bearing capacities of PCHS‐LJs are increased when decreasing the number of proposed joints or when adding the longitudinal ribs. For the specimens without the longitudinal ribs, a wide transverse crack appears near the first transverse ribs, whereas the specimens with the longitudinal ribs do not exhibit this phenomenon. Thus, longitudinal ribs should be added to optimize the PCHS‐LJ failure modes. Finally, solid finite element (FE) models of the test specimens were established in MSC. MARC. The analysis results are basically consistent with the experimental results.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Structural Behavior of Reinforced Concrete
Structural Load-Bearing Analysis · Structural Engineering and Materials Analysis