Single Pole‐to‐Ground Fault Location Method for MMC‐HVDC System Using Wavelet Decomposition and DBN
Xinjie Ye, Sheng Lan, Xiao Si-jie, Yongbin Yuan
Fuzhou University
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Accurate and reliable fault location technology is essential to the stable operation of the modular multilevel converter‐high voltage direct current (MMC‐HVDC) system. Aiming at the difficulty of locating high‐resistance ground faults on MMC‐HVDC transmission lines, this paper proposes a method for fault location of transmission lines based on wavelet transform and deep belief network (DBN). First, the wavelet transform is used to decompose the original single pole ground fault voltage waveform, and then the high‐frequency and low‐frequency components obtained are used as training samples to train different DBN models, the final fault location results are obtained by superimposing the outputs of each model at last. The ±250 kV double‐ended MMC‐HVDC system model is established by using PSCAD/EMTDC, which can simulate the faults of different positions and different transition resistances. In order to verify the fault location performance of the proposed method, it is compared with two machine learning fault location methods. The results show that this method can accurately and reliably locate the single pole‐to‐ground fault of the transmission line with transition resistance of up to 10 000 Ω at low sampling frequency of 20 kHz. © 2020 Institute of Electrical Engineers of Japan. Published by Wiley Periodicals LLC.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程HVDC Systems and Fault Protection
Power Systems Fault Detection · Electrical Fault Detection and Protection