Intelligent optimization of cold radial forging process for 20CrMnTiH alloy based on GA-BP and performance analysis
Wenxia Xu, Zhaohui Wang, Xuwen Zhu, Bowen Zhang, Zecheng Zheng, Mi Lv, Hongxia Wang
Wuhan University of Science and Technology Hubei University of Automotive Technology
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
For the forming of hollow components, cold radial forging (CRF) is thought to be one of the best manufacturing processes. However, minute modifications to the alloy composition during the stage of cold deformation processing can have an impact on the material's manufacturability. In order to tackle the issues of elevated optimization costs, challenging data acquisition, and forming quality prediction when combining multiple processes, like heat treatment and material composition. In this paper, we propose to build an intelligent prediction model to realize the prediction of the forming quality of CRF of 20CrMnTiH alloy using a back-propagation neural network (GA-BP) optimized by genetic algorithm. The evaluation of forming quality is based on damage, residual stress, and equivalent strain. The effects of alloy composition and spheroidal annealing (SA) process parameters are studied in relation to forming quality. The three prediction models of GA-BP perform better in terms of R2 (coefficient of determination) and MSE (mean square error) than the conventional BP neural network and four other machine learning techniques (gradient-enhanced decision tree, random forest, support vector regression, logistic regression, and logistic regression). Based on a thorough comparative analysis of the evaluation metrics of all three prediction models and multi-objective optimization, it can be concluded that the Pareto solution set produced by NSGA-II has the best distribution uniformity. Remaining stresses were reduced by 12 percent, equivalent strain by 15 percent, and component damage by 30 percent after the obtained process parameters (0.17%C-0.24%Si-0.81%Mn-0.03%P-0.03%S-1.15%Cr-0.05%Ni-0.06%Ti, Te: 60℃, ATi: 4.57h) were optimized using the suggested methodology. The findings demonstrate that the approach presented in this paper improves the CRF molding quality effect in addition to making the optimized model significantly more accurate at predicting molding quality precision.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Metal Forming Simulation Techniques
Metallurgy and Material Forming · Machine Learning in Materials Science
参考文献 44
此处列出前 3 条
引用本文 11
按被引量排序,此处列出前 3 条