Spray deposition of sulfonated cellulose nanofibers as electrolyte membranes in fuel cells
Thomas Bayer, Benjamin Vaughan Cunning, Břetislav Šmíd, Roman Selyanchyn, Shigenori Fujikawa, Kazunari Sasaki, Stephen Matthew Lyth
Kyushu University Next-Generation Fuel Cell Research Center, Kyushu University International Institute for Carbon-Neutral Energy Research, Kyushu University Institute for Basic Science
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Nanocellulose is a promising new membrane material for fuel cells, with much lower cost and environmental impact compared with Nafion or Aquivion. It is mechanically strong, is an excellent hydrogen barrier and has reasonable proton conductivity. Here, sulfonation of cellulose nanofibers is performed to enhance the conductivity (up to 2 × 10− 3 S cm− 1) without compromising the membrane integrity, and fuel cells are fabricated with 30 µm-thick “paper” membranes. The hydrogen crossover current is two orders of magnitude lower than for Nafion fuel cells with equivalent thickness, but the power density is rather low. Spray-coating is used to deposit 8 µm-thick membranes directly onto the electrocatalyst layer, in a process analogous to 3D printing or additive manufacturing. The resulting paper fuel cell has high current density (> 0.8 A cm− 2) and power density (156 mW cm− 2) under standard measurement conditions (H2/air; 80°C; 95% RH; 0.1 MPa), attributed to decreased membrane resistance. The cost of the spray-painted cellulose membranes is calculated to be ~ 50 $ m− 2, which is much lower than that of Nafion, even without taking into consideration economies of scale. This new concept in electrochemical energy conversion paves the way for the mass production of affordable, recyclable fuel cells. Graphic abstract
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Fuel Cells and Related Materials
Advanced Cellulose Research Studies · Advancements in Solid Oxide Fuel Cells