Enhanced high-rate capability of LiNi0.83Co0.11Mn0.06O2 cathodes by homogeneous Sr2+ doping
Teng Ma, Zhikun Zhang, Junjie Zhang, Shuaijie Li, Renfei Liu, 罗芳春, Lili Zhang, Zhen Xu 等 10 位
Changji University Yili Normal University
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
To suppress capacity degradation of Ni-rich LiNi 0.83 Co 0.11 Mn 0.06 O 2 (NCM) cathodes with radially oriented primary grains, a homogeneous Sr 2+ doping strategy was developed by controlling the Sr 2+ diffusion path from the surface into the bulk. Introducing SrO during sintering enabled Sr 2+ to penetrate along the radially aligned primary grains, achieving uniform distribution throughout the material. The NCM-Sr cathode with 0.7% Sr 2+ exhibited superior rate performance, delivering specific capacities of 182.5, 172.3, and 165.7 mAh g − 1 at 1C, 5C, and 10C, respectively, compared to 167.3, 148.1, and 143.2 mAh g − 1 for the undoped sample. Uniform Sr 2+ incorporation, facilitated by radial grain alignment, effectively mitigates localized strain accumulation during cycling, enhancing structural stability. For the first time, NCM cathodes were analyzed using deep learning in conjunction with detailed morphological information, confirming that controlled particle orientation and uniform small primary particles significantly improve electrochemical performance. These surface-engineered cathodes demonstrate extended cycle life, stable voltage profiles, and excellent high-rate capabilities, highlighting an effective strategy for advancing Ni-rich ternary cathode materials in high-energy lithium-ion batteries.
逐年被引趋势
暂无年度引用数据
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Advancements in Battery Materials
Battery Modeling and Management · Advanced Battery Materials and Technologies