New Evaluation Method for Hot Cracking Tendency of High Alloyed Steels Containing Niobium
Nico Scheidhauer, Jean Amadeo Brambila, Gotthard Wolf, Francisco Manoel Perez do Nascimento, Claudia Dommaschk
TU Bergakademie Freiberg
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
The present study investigated existing and potential approaches for hot cracking analysis of cast alloys and showed a promising and very applicable new specimen for high alloyed steels. The reliability of this specimen has been demonstrated by adding niobium to alloy HH (ASTM A297), or alloy 1.4837 (ISO 11973). Niobium shows a very positive impact on hot cracking behavior and can thereby reduce scrap in steel foundries. Amounts above 0.6 wt% niobium can reduce the size and number of hot cracks significantly. The reduction of hot cracking tendency was quantified by the cracking factor CFNb2. The positive effect is associated with the reduction in solidification interval length that was measured by thermal analysis and the observed “healing” of cracks in the microsections. Both effects are promoted by niobium. The promotion of the ferritic solidification seems to have no positive impact on the hot cracking behavior.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
材料 / 化学Metallurgical Processes and Thermodynamics
High Temperature Alloys and Creep · Solidification and crystal growth phenomena