研究论文
Hole-defects in soluble core assisted aluminum droplet printing: Metallurgical mechanisms and elimination methods
Hao Yi, Lehua Qi, Jun Luo, Ni Li
Northwestern Polytechnical University California State University Los Angeles
来源Applied Thermal Engineering
年份2018
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
摘要 · 节选
暂未获取摘要。可打开原文或 PDF，后续可基于全文生成更完整的速读。
逐年被引趋势
1790
19
1720
21
22
23
24
25
26
关键指标
68
被引次数 · OpenAlex
3.60
领域内被引倍数
同类平均 = 1
同类平均 = 1
前 6%
引用位次
同领域 · 同年份 · 同类型
同领域 · 同年份 · 同类型
41
参考文献
Google Scholar 与 OpenAlex 的被引统计范围不同，数值存在差异属正常。
AI 辅助阅读
依据：文献信息
论文问答
当前基于文献信息回答
可就本文提问；依据不足时会说明。
学术脉络
学科主题
工程Nanomaterials and Printing Technologies
Additive Manufacturing and 3D Printing Technologies · Solidification and crystal growth phenomena
参考文献 41
Experimental and Theoretical Study of the Impact of Alumina Droplets on Cold and Hot Substrates
被引 90C. Escure, M. Vardelle, P. Fauchais · Plasma Chemistry and Plasma Processing · 2003
Numerical analysis of pileup process in metal microdroplet deposition manufacture
被引 36Jun Du, Zhengying Wei · International Journal of Thermal Sciences · 2015
Toward 3D Printing of Pure Metals by Laser‐Induced Forward Transfer
被引 287Claas Willem Visser, Ralph Pohl, Chao Sun · Advanced Materials · 2015
此处列出前 3 条
引用本文 68
Correlation between arc mode, microstructure, and mechanical properties during wire arc additive manufacturing of 316L stainless steel
被引 426Leilei Wang, Jiaxiang Xue, Qiang Wang · Materials Science and Engineering A · 2019
Effects of laser scanning speeds on different states of the molten pool during selective laser melting: Simulation and experiment
被引 194Weihao Yuan, Hui Chen, Tan Cheng · Materials & Design · 2020
Processing, mechanical characterization, and micrography of 3D-printed short carbon fiber reinforced polycarbonate polymer matrix composite material
被引 112Ankit Gupta, Ismail Fidan, Seymur Hasanov · The International Journal of Advanced Manufacturing Technology · 2020
按被引量排序，此处列出前 3 条