A comprehensive numerical study on heat transfer and friction characteristics of offset-strip fins
Mattia Grespan, Luigi Calò, Lorenzo Carlesso, Adriano Leonforte, Diego Angeli
University of Modena and Reggio Emilia
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Offset-strip fins are among the most used geometries in compact heat exchangers. The geometric and flow parameters of the fins affect their heat transfer effectiveness and head losses. Hence, accurate predictive models are needed to guide the design process. However, most of the correlations available in the literature are valid only for a limited set of geometric configurations and flow regimes. This work discusses the derivation of multivariate response surfaces for the equivalent Darcy and Colburn factors in offset-strip fins. These surfaces feature clear applicability ranges and extend over wide Reynolds and Prandtl number ranges (50≤Re≤12000, 0.71≤Pr≤190). In addition, a novel empirical model for the Prandtl number scaling exponent is proposed. The analysis is carried out through a Design of Experiment approach, performed with computational techniques. Each numerical experiment is carried out by CFD analysis of a periodic fin geometry. The obtained response surfaces approximate CFD results with a mean deviation of ±8.4%. Moreover, application of the correlations to the analysis of complete heat exchangers issued mean and maximum deviations of ±7.8% and ±20%, respectively, thus highlighting the usefulness of the proposed models for the accurate modelling of offset-strip fins in heat transfer applications.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Heat Transfer and Optimization
Heat Transfer Mechanisms · Heat Transfer and Numerical Methods