Towards in-situ failure assessment: Deep learning on DIC results for laminated composites
Amir Mohammad Mirzaei
Cranfield University
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Predicting fracture load in laminated composites with stress raisers is challenging due to complex failure mechanisms such as delamination, fibre breakage, and matrix cracking, which are heavily influenced by fibre orientation, layup sequence, and notch geometry. This study aims to address this by developing a novel deep learning framework that leverages solely experimental strain field data from Digital Image Correlation (DIC) for accurate, in-situ predictions—bypassing the need for finite element simulations or empirical calibrations. Two alternative architectures are explored: a multi-layer perceptron (MLP) that processes numerical values of maximum principal strain from a targeted rectangular region ahead of the notch, enhanced by advanced feature selection (mutual information, Lasso, and SHAP) to focus on critical data points; and a convolutional neural network (CNN) trained on full-field strain images, bolstered by data augmentation to handle variability and prevent overfitting. Validated across 116 quasi-static tests encompassing 31 distinct configurations—including six layups (quasi-isotropic to highly anisotropic) with four off-axis angles for open-hole specimens, and one cross-ply layup with four off-axis and four on-axis notch orientations for U-notched specimens—the MLP and CNN achieve coefficients of determination (R 2 ) of 0.86 and 0.82, respectively. The framework captures a broad spectrum of damage modes and responses, from brittle fibre-dominated fracture to ductile delamination-driven failure, and due to its computational efficiency and reliance only on DIC measurements, the approach enables practical in-situ fracture load estimation.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Mechanical Behavior of Composites
Fatigue and fracture mechanics · Metal Forming Simulation Techniques