Experimental investigation on debonding behavior of Fe-SMA-to-steel joints
Lingzhen Li, Wandong Wang, Eleni Chatzi, Elyas Ghafoori
ETH Zurich Institute of Structural Engineering Empa Northwestern Polytechnical University
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
This work is the first systematic study on the static behavior of adhesively-bonded Fe-SMA-to-steel joints in applications adopting iron-based Shape Memory Alloys (SMAs). In order to provide a better understanding on the mechanical behavior of the adhesively bonded joint, an experimental campaign was established, involving 24 lap-shear tests in a displacement-controlled loading regime. The test series includes two types of Fe-SMAs (non-prestrained and prestrained), three types of adhesives (SikaDur 30, Araldite 2015, and SikaPower 1277), and three different thickness values (0.5, 1, and 2 mm) for the adhesive. A digital image correlation (DIC) technique was employed to measure the full-field displacement and strain, which were then used to infer the shear behavior. The mechanical behavior was analyzed on the basis of the experimentally derived load–displacement curves, the shear stress profiles along the bond line, and the bond–slip curves; three stages were observed during the loading process of a bonded joint: (i) a linear stage, (ii) a damage accumulation stage, and (iii) a debonding propagation stage. The test results indicate that a more ductile adhesive or a thicker adhesive layer possess a higher fracture energy, leading to a greater bond capacity. The results were also compared against those from lap-shear tests on carbon fiber reinforced polymer (CFRP) bonded joints. It is found that an Fe-SMA bond and a CFRP bond behave similarly when a linear adhesive is utilized; a nonlinear adhesive, however, results in significant mechanical differences between the two bonded joints, which merit individual analysis.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Structural Behavior of Reinforced Concrete
Mechanical Behavior of Composites · Shape Memory Alloy Transformations