Experimental and numerical studies on mechanical behavior of pre-stressed infilled rock joints subjected to horizontal vibration loading
Bailong Ma, Kai Zhang, Tao Jiang, Yuezhang Zhu
China University of Mining and Technology State Key Laboratory for Geomechanics and Deep Underground Engineering Huaibei Mining (China)
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Underground jointed rock masses are usually subjected to a coupled effect of static pre-stress and vibration disturbance from rock-cutting in Tunnel Boring Machines (TBMs) tunneling. To investigate the mechanical behavior of pre-stressed infilled rock joints disturbed by horizontal vibration loading, a series of laboratory and numerical experiments were conducted, based on the in-situ vibration characteristics during TBM rock-cutting. The P-wave velocity and direct shear test techniques are combined to quantitatively characterize the damage of infilled rock joints. The experimental results reveal that the damage degree of rock joints exhibits a nonlinear increase with the increase of vibration frequency and amplitude, and the decrease of static pre-stress. Low static pre-stress (below 0.5 MPa), high vibration frequency (above 70 Hz) and high vibration amplitude (above 0.3 mm/s) are adverse factors to the stability of rock joints. From the PFC2D simulation, the contact force chain and contact force field were analyzed to elucidate the failure mechanism of infilled rock joints. The failure mode of infilled rock joints is closely related to the level of parameters, consisting with the results in laboratory experiments. In addition, the comparison of vibration results for weakly and strongly filling material demonstrates that grouting reinforcement enhanced the vibration resistance of in-situ jointed rock masses.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Rock Mechanics and Modeling
Tunneling and Rock Mechanics · Geotechnical and Geomechanical Engineering