Transient analysis of dust exposure under different supply airflow angle in a blasting tunnel based on CFD
Zhuwei Xie, Yimin Xiao, Qian Zhao, Jianquan Lin
Chongqing University Changzhou University
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
In recent years, with the rapid development of metro tunnels, many scholars have paid attention to the serious dust environment during blasting construction. To efficiently alleviate the dust pollution in working zone and reduce the ventilation time after blasting, this study adopted the CFD numerical simulation method to investigate the effect of supply airflow angle on the dust removal performance of 3 m breathing height within the working zone in an entrance and exit metro tunnel. The supply airflow angle corresponding to the optimal dust removal performance and minimum ventilation energy consumption was determined after in-depth analysis of four kinds of supply airflow angles. The simulation results showed that when the supply airflow angle was 30°, the minimum ventilation time was obtained in the breathing zone 5 m away from the driving face; while in the breathing zone 10 m, 15 m and 20 m away from the driving face, the minimum ventilation time was achieved when the supply airflow angle was 10°. From the view of the weighted average dust concentration and ventilation time in the working zone, the supply airflow angle of 10° could obtain the optimal dust removal performance and minimum ventilation energy consumption, with dust removal performance improved by 67.6% and ventilation energy consumption reduced by 20.46%.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Industrial and Mining Safety
Fire dynamics and safety research · Blasting Impact and Analysis
参考文献 23
此处列出前 3 条
引用本文 27
按被引量排序,此处列出前 3 条