A review of recent research on two-phase thermal management strategies for gallium nitride power electronics applications
Sadegh Sadeghi, Amir Sajjad Bahman
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
The reliability and efficiency of high-power electronic systems are highly dependent on their thermal behavior, as increasing heat fluxes adversely affect device integrity and performance, and speed up degradation. Conventional single-phase cooling solutions cannot manage the high thermal loads generated in today’s high-density applications. The issue is even greater for wide bandgap technologies such as gallium nitride (GaN), in which quick switching and compact device layouts lead to localized heat levels that can be more than 100 W/cm 2 , remarkably more than what conventional cooling methods can properly dissipate. Due to use of the latent heat of vaporization, two-phase cooling techniques have been proposed as promising solutions to meet these cooling demands. This review concentrates on recent research on passive and active two-phase thermal management strategies, elaborating on their operational principles, thermal performance, and integration issues. Influential design and optimization factors such as geometry, coolant/refrigerant selection, flow rate, saturation pressure and temperature, thermal interface materials, and engineered surface wettability are elaborately discussed. This paper also presents experimental and computational modeling approaches used to investigate boiling dynamics and predict thermal performance in high-power modules. Among the reported strategies, microchannel heat sinks, spray cooling, and two-phase jet impingement show the highest critical heat fluxes and heat transfer coefficients, making them proper candidates for compact GaN-based modules. Moreover, hybrid approaches that combine multiple techniques, e.g., PCM with microchannels or vapor chambers with jet impingement, are increasingly reported as suitable solutions to balance reliability, compactness, and high thermal performance. Future research directions are also presented to back up the development of advanced cooling designs for high-power electronics.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Heat Transfer and Boiling Studies
Heat Transfer and Optimization · Silicon Carbide Semiconductor Technologies