Establishment of a new hybrid fracture criterion for cross wedge rolling
Zbigniew Pater, J. Tomczak, Tomasz Adam Bulzak
Lublin University of Technology
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
This paper relates to the problem of fracture in cross wedge rolling (CWR). A FEM analysis is performed of the stresses in the axial zone of the workpiece formed by this method. Thirteen CWR cases are analyzed for different values of the forming angle, α=<15°; 35°>, spreading angle, β=<4°; 12°>, and reduction ratio, δ=<1.1; 1.9>. Numerical results demonstrate that the stresses in the CWR process are characterized by the mean stress triaxiality ηav=<0.075; 0.334> and the mean Lode angle parameter Θav<−0.905; −0.415>. Under this stress state, fracture may occur as a result of both void formation and shear fracture. A new hybrid criterion of fracture is proposed, which combines 2 well-known fracture criteria, i.e. the maximum shear stress criterion and the Oh criterion (normalized Cockcroft-Latham criterion). It should, however, be mentioned that the effect of the above criteria on the final value of the proposed hybrid criterion depends on the stress triaxiality. The critical value of the proposed fracture criterion is determined by a new calibration test based on rotary compression, in which the stress state is similar to that in parts produced by the CWR method. The critical value of the new fracture criterion is determined for the C45 grade steel in the temperature range of 950–1150 °C. Results demonstrate that increasing the forming temperature leads to an increase in the critical damage function. To verify the proposed fracture criterion, CWR tests are performed under conditions leading to fracture of the material (C45 steel). Experimental findings and numerical results obtained by the new hybrid fracture criterion show a very high agreement in terms of both quality (crack occurrence prediction) and quantity (crack length prediction).
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Metal Forming Simulation Techniques
Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels