Bond length and interface failure mechanism of anchor cable under continuous radial pressure conditions
Jian Ouyang, Xiuzhi Shi, Xianyang Qiu, Zongguo Zhang, Zeyu Li
Central South University
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
The anchoring capacity of the anchor cable is closely related to the bonding length and radial pressure conditions. Through field pull-out tests, theoretical analysis, numerical simulation, and industrial tests, this study clarifies the relationship between radial pressure and bonding length for the ultimate pull-out force and reveals the microscopic failure process of the resin-rock interface in the anchoring system. The results show that the ultimate load increases with the increase of bonding length in three different stages: rapid, slow, and uniform growth. The new mechanical model developed considering radial pressure describes the inverse relationship between radial pressure and the plastic zone on the bonding section, and quantifies the reinforcing effect of confining pressure on the anchoring force. During the pull-out process of the anchor cable, the generation of failure cracks is in the order of orifice, bottom, and middle of the hole. Radial pressure can effectively enhance the ultimate pull-out force, alleviate the oscillation increase of pull-out force, and inhibit resin cracking, but will produce an external crushing zone. It also reveals the synergistic effect between bonding length and radial pressure, and successfully carries out industrial tests of anchor cable support, which ensures the stability of the stope roof and provides an important reference for the design of anchor cable support in deep high-stress mines.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Geomechanics and Mining Engineering
Rock Mechanics and Modeling · Geotechnical Engineering and Soil Stabilization
参考文献 34
此处列出前 3 条
引用本文 25
按被引量排序,此处列出前 3 条