Performance enhancement of a novel serpentine channel cooled plate used for cooling of Li-ion battery module
Hayder Mohammad Jaffal, Nabeel Sameer Mahmoud, Ahmed Abdulnabi Imran, Ala Hasan
Mustansiriyah University University of Technology - Iraq VTT Technical Research Centre of Finland
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
One of the most significant challenges of battery thermal management system is manifested in maintaining optimal battery performance by keeping the overall battery temperature within a narrow temperature range. The present work aimed to study a novel design of ribbed serpentine channel cooled plate (SCCP) as an effective cooling module of Li-ion battery. The study included a numerical simulation of the effect of the rib orientation (90 ͦ, 75 ͦ, 60 ͦ, and 45 ͦ) and the rib shape (semi-circular, trapezoidal, and triangular) on the hydrothermal performance of SCCP. The study was conducted under laminar flow conditions for a Reynolds number range (200–1000) and battery cell discharge rate range (1C–2C). The numerical simulation results were validated against experimental measurements of the performance of a SCCP with semi-circular ribs that rotated by 90 ͦ. The validation showed a good agreement with a maximum deviation of 8% and 11% for the Nusselt number and the friction factor, respectively. The results of the study indicated that the ribs play a vital role in improving the heat transfer. It is found that the rib orientation was more effective than the rib shape in enhancing the hydrothermal performance improvement factor. In addition, the triangular rib with 45 ͦ orientation showed highest performance improvement factor compared with the other SCCP designs with a value of 1.3.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Battery Modeling and Management
Heat Transfer and Optimization · Heat Transfer Mechanisms