Modified hybrid damage criterion for the cross wedge rolling process
Tomasz Adam Bulzak, Zbigniew Pater, J. Tomczak
Lublin University of Technology
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
This paper considers the problem of material fracture in the cross wedge rolling (CWR) process. A modification of the hybrid damage criterion dedicated to crack prediction in CWR was proposed. The aim of the modification was to make the limits of the new criterion independent of the implementation temperature of the calibration tests. A rotary compression test was carried out to obtain specimens in which cracking is initiated. Based on the analysis of the FE results of the rotary compression test simulation, the final version of the modified hybrid damage criterion (MHDC) was presented. Using the results of experimental tests and FE simulations, the MHDC limit values were determined. The MHDC limits for the three different temperatures were obtained at similar levels, indicating that the MHDC limits can be made independent of the rotary compression test execution temperature. The MHDC was verified on the example of the cross wedge rolling of a railway axle forging. The verification carried out confirmed the possibility of predicting cracks in CWR-rolled forgings using MHDC. The research results obtained are of an applied nature. In particular, the criterion developed can be helpful in the design of cross wedge rolling technology.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Metal Forming Simulation Techniques
Metallurgy and Material Forming · Mechanical Failure Analysis and Simulation