Assessment of ductile fracture criteria with respect to their application in the modeling of cross wedge rolling
Zbigniew Pater, J. Tomczak, Tomasz Adam Bulzak, Łukasz Wójcik, Patrycja Walczuk-Gągała
Lublin University of Technology
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Ductile fracture is a common failure mode in cross wedge rolling (CWR) and can be predicted by analyzing material damage functions. This paper describes 10 such functions. To determine the moment of fracture, one must know the critical damage function which is calculated via calibration test. It is vital to ensure that the stress state during calibration is as close as possible to the real stress. Since there are no calibration tests dedicated to cross rolling processes, a new test has been devised, based on a rotary compression process for cylindrical samples. Using the proposed calibration test and 10 fracture criteria, the critical damage values of C45 steel deformed at 1150 °C are determined. Next, CWR tests are performed using technological parameters conducive to crack formation in the axial region of the formed step on the workpiece. Numerical and experimental results of the moment of crack initiation and its length are compared, and – as a result – 4 damage criteria that best predict material fracture are selected.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Metal Forming Simulation Techniques
Metallurgy and Material Forming · Mechanical Failure Analysis and Simulation