Multiscale analysis of high impact toughness in a novel low-cost titanium alloy
Zhongli Qiao, Qinyang Zhao, Zixuan Meng, Ping Yi Guo, Runqi Zhang, Yan Zhang, Shuo Song, Cheng Lin 等 10 位
Xi'an University of Architecture and Technology Chang'an University Shaanxi University of Science and Technology Northwest Institute For Non-Ferrous Metal Research
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
This study systematically investigates the deformation behavior of novel low-cost Ti-6Al-4V-0.4Fe-0.6Mo alloy with varying microstructures under dynamic impact loading. The microstructures with equiaxed and bimodal were fabricated by controlling the temperatures (880°C, 900°C and 920°C) and cooling rates (air cooling, AC and furnace cooling, FC). Charpy impact testing results show that the 920FC sample, featuring large equiaxed α phases (average size: 8.2 μm), α lamellae (thickness: 1.5 μm), and retained β-phases, exhibits the highest impact toughness of ∼62.5 J/cm 2 . Compared with 880FC (∼45.3 J/cm 2 ), 900FC (∼42.1 J/cm 2 ) and Ti-6Al-4V alloys with equiaxed microstructures (∼50 J/cm 2 ), the impact toughness is improved by 38%, 48% and 25%, respectively. Moreover, the impact toughness of the 920AC sample (∼47.6 J/cm 2 ) is 20% higher than that of 880AC (∼39.5 J/cm 2 ) and 900AC samples (∼39.5 J/cm 2 ). Microstructural analyses results show that both 920AC and 920FC samples exhibit low α phase aspect ratios, high α phase spheroidization proportion, and large α grain sizes. The 920FC sample has a percentage of twin boundaries as high as 58.7%, which is the core mechanism for its superior impact toughness over the 920AC sample. Interestingly, we found that twinning nucleation in both α and secondary α phases (α s ) is induced by stacking faults and the abundant stacking faults form martensite 9R phase. The coarsening and growth of twins are affected by dislocation slip. In addition, the calculated results based on the Yu Rui-huang electron theory show that Fe and Mo weaken the inhibitory effect of V on dislocation slip and provide a low-energy path for twin boundary migration.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
材料 / 化学Titanium Alloys Microstructure and Properties
Microstructure and Mechanical Properties of Steels · High-Velocity Impact and Material Behavior