Crystallographic orientation, metallurgical defects and tensile behavior of Mo-14Re tubes fabricated via electron beam wire deposition
B.J. Wang, X.Q. Gao, G. Yang, J.Y. Wang, Jingbo Wang, Y. Liu, H.L. Xu, J. F. Li
Northwest Institute For Non-Ferrous Metal Research Aviation Industry Corporation of China (China) AVIC Manufacturing Technology Institute (China) Northwestern Polytechnical University
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Molybdenum (Mo) alloys are promising structural materials for advanced nuclear energy systems, yet conventional thermomechanical processing is limited in fabricating complex Mo-based components with high material utilization. Vacuum-based electron beam wire deposition (EBWD) exhibits unique advantages for the fabrication of Mo alloys compared with other non-vacuum additive manufacturing techniques. In this study, Mo-14Re circular tubes were fabricated via EBWD, and their crystallographic texture, metallurgical defects, room-temperature tensile deformation mechanism were investigated. The EBWD-deposited tubes exhibit a columnar structure with mixed <111> and <110> textures along the building direction (BD), and each columnar domain contains abundant fine grains. Due to bidirectional heat dissipation along the tube wall, a distinct radial microstructure heterogeneity emerges across the tube wall: finer grains, higher porosity and higher geometrically necessary dislocation (GND) density are observed near the inner and outer walls. The main metallurgical defects include random intralayer pores and interfacial cracks. Pores arise from vapor phases generated by impurity element evaporation and local keyhole collapse, while interfacial cracks form due to grain boundary (GB) impurity segregation-induced weakening combined with high thermal stress during deposition. The alloy delivers a prominently improved mechanical performance, with an average ultimate tensile strength of ∼376 MPa and an average fracture elongation of ∼13%, which is a significant enhancement over WAAM-fabricated pure Mo. Room-temperature plastic deformation is dominated by the activation of {110}<111> slip systems, assisted by secondary {112}<111> slip. This work provides insights into microstructure tailoring and performance optimization for additively manufactured Mo-Re alloys.
逐年被引趋势
暂无年度引用数据
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Additive Manufacturing Materials and Processes
Fusion materials and technologies · Microstructure and mechanical properties