Understanding the influence of particle size on the reaction mechanism in porous La0.6Sr0.4CoO3-δ air electrodes
Mina Yamaguchi, Yuki Amano, Marika Sakai, Riyan Achmad Budiman, Keiji Yashiro, Tatsuya Kawada
Tohoku University National Research and Innovation Agency Shimane University
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Enhancing the electrode performance of high-temperature devices such as solid oxide fuel cells and solid oxide electrolysis cells is essential for reducing their operating temperatures. One approach is to reduce the particle size in the porous electrodes, which has been shown to decrease their area specific resistance. In this study, we investigated the effect of particle size on the reaction mechanism of mixed-conducting La 0.6 Sr 0.4 CoO 3-δ electrodes by fabricating half-cells with 650 nm-thick films composed of 55 ± 15 nm particles (nanoporous) and 15 μm-thick films composed of ∼800 nm particles (microporous). Electrochemical impedance spectroscopy and analysis using the Gerischer model were performed. For both micro- and nanoporous electrodes, a consistent relationship was found between the reaction field and the particle size, with the reaction field being about three times the particle size under our conditions. The surface reaction resistance and the effective oxygen transport resistance of microporous and nanoporous electrodes show overall similar values, with differences on the order of 0.5–1 orders of magnitude, indicating that they are largely comparable. In the DC polarization measurements, the current density of the microporous sample, when multiplied by a constant factor, closely matched that of the nanoporous sample. This suggests that the reaction mechanisms at both these electrodes were similar. This study demonstrates that the improvement in electrode performance with reduced particle size does not arise from intrinsic changes in the material properties, but rather from the increase in specific surface area. These findings provide useful guidelines for designing high-performance mixed-conducting porous electrodes. • La 0.6 Sr 0.4 CoO 3-δ porous electrodes with different particle sizes were fabricated. • Gerischer impedance model was used for porous electrode data fitting. • Characteristic length and resistances were calculated from Gerischer impedance. • The nanoporous sample current was a constant multiple of the microporous current. • Nano and microporous samples exhibited the same reaction mechanism.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
材料 / 化学Advancements in Solid Oxide Fuel Cells
High-Temperature Coating Behaviors · Gas Sensing Nanomaterials and Sensors