Influence of bedding structure on stress-induced elastic wave anisotropy in tight sandstones
Xiaying Li, Xinglin Lei, Qi Li, Dianguo Chen
Chinese Academy of Sciences Institute of Rock and Soil Mechanics University of Chinese Academy of Sciences State Key Laboratory of Geomechanics and Geotechnical Engineering
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
To understand the evolution of stress-induced elastic wave anisotropy, three triaxial experiments were performed on sandstone specimens with bedding orientations parallel, perpendicular, and oblique to the maximum principal stress. P-wave velocities along 64 different directions on each specimen were monitored frequently to understand the anisotropy change at various stress levels by fitting Thomsen's anisotropy equation. The results show that the elastic wave anisotropy is very sensitive to mechanical loading. Under hydrostatic loading, the magnitude of anisotropy is reduced in all three specimens. However, under deviatoric stress loading, the evolution of anisotropic characteristics (magnitude and orientation of the symmetry axis) is bedding orientation dependent. Anisotropy reversal occurs in specimens with bedding normal/oblique to the maximum principal stress. P-wave anisotropy ε′ is linearly related to volumetric strain Sv and dilatancy, indicating that stress-induced redistribution of microcracks has a significant effect on P-wave velocity anisotropy. The closure of initial cracks and pores aligned in the bedding direction contributes to the decrease of the anisotropy. However, opening of new cracks, aligned in the maximum principal direction, accounts for the increase of the anisotropy. The experimental results provide some insights into the microstructural behavior under loading and provide an experimental basis for seismic data interpretation and parameter selection in engineering applications.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
物理Seismic Imaging and Inversion Techniques
Rock Mechanics and Modeling · Geotechnical and Geomechanical Engineering