Liquid metal/polyurethane core-sheath coaxial conductive filaments for human motion detection and thermal management
Ke Wang, Jinlin Lv, Qian Ma, Deshan Cheng, Shudong Wang, Jianhua Ran
Wuhan Textile University
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Flexible strain sensors have been widely applied in human motion monitoring, healthcare, smart textiles, and wearable electronics. However, existing application-specific technologies face several challenges, including non-uniform distribution of conductive materials within flexible substrates, delamination risks due to modulus mismatch, and inadequate mechanical durability and conductive stability. This study presents a scalable fabrication strategy for core-sheath filaments through wet spinning. The filament design employs liquid metal (LM) as the conductive core, which exhibits exceptional electrical conductivity, fluidity, and long-term durability, while thermoplastic polyurethane (TPU) functions as the protective sheath, offering high elasticity and robust mechanical strength. The TPU layer effectively encapsulates the LM core, endowing the resulting strain sensor with excellent stretchability (0–100%), compressibility (30–240 N), high sensitivity (gauge factor < 8.37), and stable performance over more than 100 cycles. The superior conductivity of the liquid metal enables precise resistance responses to subtle physiological deformations, such as limb movement, respiration, and heartbeat. Furthermore, fabrics woven from LM/TPU filaments demonstrate enhanced thermal insulation and efficient heat dissipation capabilities. This work proposes an efficient and scalable method for the mass production of flexible liquid metal sensors and multifunctional thermally protective textiles.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Advanced Sensor and Energy Harvesting Materials
Nanomaterials and Printing Technologies · Non-Invasive Vital Sign Monitoring