Beyond viscosity curves: A critical rheological perspectives for converging material extrusion additive manufacturing and powder injection molding
Dagmar Endlerova, Martin Novák, Berenika Hausnerová
Tomas Bata University in Zlín
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Rheological behaviour of highly filled polymer feedstocks critically governs their processability in material extrusion (MEX) additive manufacturing and powder injection molding (PIM). These converging technologies require robust flow control to achieve defect-free, dimensionally accurate parts. Despite extensive rheology-related literature, clear and transferable links between measured properties and process optimization remain scarce. This review summarizes rheological strategies for improving processing of highly filled compounds, with emphasis on maximum packing, wall slip, yield stress, powder-binder segregation and pressure-dependent flow. It also highlights conceptually inconsistent practices, including the widespread use of simple shear-thinning models for structurally complex feedstocks or activation energy evaluated at a constant shear rate. By focusing on a limited set of physically meaningful rheological parameters and their relation to typical processing failures, the review outlines a framework for material selection and formulation optimization in converging MEX and PIM technologies.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Additive Manufacturing and 3D Printing Technologies
Rheology and Fluid Dynamics Studies · Injection Molding Process and Properties
参考文献 163
此处列出前 3 条
引用本文 1
按被引量排序,此处列出前 3 条