Oxide dispersion strengthened IN718 owing to powder reuse in selective laser melting
Hyungsoo Lee, Joong Eun Jung, Dong‐Soo Kang, Hi Won Jeong, Dae Won Yun, Jungho Choe, Young-Soo Yoo, Seong-Moon Seo
Korea Institute of Materials Science
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Considering the high cost of powder, powder reuse is necessary for economic and sustainable selective laser melting (SLM). Since powder quality is a key factor in determining the mechanical properties of SLMed parts, it is essential to understand the effects of powder reuse on the powder quality and SLMed parts. In this study, we investigated the effects of IN718 powder reuse on SLM-processed microstructures and their mechanical properties. The SLM process was repeated 10 times using the virgin powder supplement method. As the number of powder reuses increased, the average particle size of the reused powder also increased. Additionally, the powder was oxidized by repeated reuse and resulted in oxide spots on the powder surface. The SLMed parts were recrystallized by homogenization heat treatment at 1065 °C, and the recrystallization fraction decreased with increasing extent of oxidation, i.e., the number of powder reuses. In the 10th SLM process conducted with powder reuse, the increased oxide fraction contributed to the dispersion hardening effect and simultaneously improved tensile strength and elongation.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Additive Manufacturing Materials and Processes
Powder Metallurgy Techniques and Materials · High Temperature Alloys and Creep