Toward defect-less and minimized work-hardening loss implementation of Al alloy/high-purity Cu dissimilar lap joints by refill friction stir spot welding for battery tab-to-busbar applications
Dongjin Kim, Seungyeop Baek, Masahiko Nishijima, Hyun‐Chul Lee, Peihao Geng, Ninshu Ma, Zheng Zhang, Hyunsu Park 等 11 位
Korea Institute of Industrial Technology Korea Automotive Technology Institute Joining and Welding Research Institute, The University of Osaka The University of Osaka
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
The refill-friction stir spot welding (RFSSW) process on the Al5052–H32 alloy joined with high-purity Cu film resulted in notable changes in the work-hardened Al alloy. The stirring action caused dynamic recrystallization in the weld zone, leading to the loss of work-hardening. Surprisingly, the plot of grain size-hardness in Al alloy after RFSSW did not follow the Hall-Petch relationship. Obtained through combined analysis with a transmission electron microscope, X-ray diffraction, and thermodynamic calculation, at the interface of Al and Cu, diffusion in nanoscale and microscale between the metals induced the formation of secondary phases (e.g., CuxAly intermetallic compounds, θ′ or θ'' phases), positively contributing to increased mechanical properties. The near-surface region in contact with the tool experienced significant compressive stresses, resulting in maximized compressive residual stresses. This, in turn, sustained or even enhanced the initial hardness of the material. Our study systematically investigates whether creating a lap joint with Cu in work-hardened Al alloy with RFSSW can yield a robust joint without defects in Al and without an overall loss of work-hardening.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Advanced Welding Techniques Analysis
Aluminum Alloy Microstructure Properties · Welding Techniques and Residual Stresses
参考文献 64
此处列出前 3 条
引用本文 35
按被引量排序,此处列出前 3 条