Sustainable porous graphitic carbon from male oil palm flower biomass via catalytic graphitization for electrode supercapacitor
Rakhmawati Farma, Widya Raphita Lumbantoruan, Nur Adi Saputra, Awitdrus Awitdrus, Anif Jamaluddin, Nidya Chitraningrum, Apriwandi Apriwandi, Irma Apriyani
National Research and Innovation Agency Riau University Sebelas Maret University University of Indonesia
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
The development of sustainable, highly conductive electrode materials is critical to advancing high-performance supercapacitors for renewable energy systems. Biomass-derived porous carbon offers environmental and economic advantages; however, its predominantly amorphous structure often results in limited electrical conductivity and inferior rate capability. In this study, porous graphitic carbon was synthesized from male oil palm flower biomass via catalytic graphitization using FeCl₃ and NiCl₂ to enhance structural ordering and electrochemical performance. Catalytic pyrolysis at 900 °C significantly improved carbon crystallinity and pore architecture. XRD and Raman analysis confirmed enhanced graphitization, with the ID/IG ratio decreasing from 1.03 (non-catalyzed) to 0.80 (FeCl₃) and 0.84 (NiCl₂). BET measurements revealed a hierarchical micro–mesoporous structure with a specific surface area of 924.822 m²/g (FeCl₃) and 905.368 m²/g (NiCl₂), compared to 822.180 m²/g for the non-catalyzed sample. The optimized FeCl₃-catalyzed sample achieved a high specific capacitance of 321.78 F/g at 1 A/g in 1 M H 2 SO 4 electrolyte, with excellent rate capability and coulombic efficiency. Galvanostatic charge-discharge measurements indicated a reduction in equivalent series resistance from 0.035 Ω (non-catalyzed) to 0.026 Ω (FeCl₃-catalyzed), confirming improved charge-transport kinetics. These results demonstrate that catalytic graphitization effectively synergizes with pore engineering to enhance conductivity, leading to superior electrochemical performance. This work highlights the potential of male oil palm flower biomass as a sustainable carbon precursor for the development of high-performance porous graphitic carbon electrodes. Future research will focus on catalyst optimization, catalyst recovery, and hybrid electrode configurations to further improve electrochemical performance and evaluate the practical feasibility of the proposed synthesis approach.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
材料 / 化学Supercapacitor Materials and Fabrication
Thermochemical Biomass Conversion Processes · Electrocatalysts for Energy Conversion