Impact of steel grade on a ship colliding with an offshore wind turbine monopile supporting structure
Karol Niklas, Alicja Bera, Y. Garbatov
Gdańsk University of Technology Instituto Superior Técnico Centro de Engenharia e Tecnologia Naval e Oceanica
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Offshore wind power is experiencing rapid development around the world. The number of installations and their size is growing. Thousands of monopile support structures with diameters of 10 m and weights of 2000 tons will be installed in the coming years. Offshore wind power installations, often located close to the shore and shipping routes, pose a new challenge to ship safety. The study analyses the damages from an accidental collision between a 6500-tonne displacement Supply Offshore Vessel and the monopile support structure with a 10 m diameter and a 15 MW wind turbine. The head-on collision cases are performed according to the DNV-ST-0126, showing the consequences for the ship and the wind turbine support structure. In addition, simulation cases with an offset between the ship's plane of symmetry and the monopile axis showed a new form of damage to the ship's plating. During a head-on sliding collision, extensive plate tearing can occur due to its cutting at the deck line and concertina tearing under the pressure of the monopile. As a result, the hull may open over a large area, including the threat of unsealing the ship's collision bulkhead. The S355 grade steel can significantly reduce collision damage by up to 50% (from 20.6 m2 to 10.5 m2 for the case studied here).
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Transportation Safety and Impact Analysis
Maritime Navigation and Safety · Structural Integrity and Reliability Analysis