Structural health monitoring on an unmanned aerial vehicle wing's beam based on fiber Bragg gratings and pattern recognition techniques
Alejandro Carvajal-Castrillón, Joham Alvarez-Montoya, Juliana Andrea Niño Navia, Leonardo Betancur, Ferney Orlando Amaya-Fernández, Julián Sierra-Pérez
Universidad Pontificia Bolivariana
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Composite materials have been extensively used on new aircraft airframes because of their advantages over metallic materials. This represents a difficulty for damage detection, a vital task for safety on the aerospace industry, as most nondestructive testing techniques are not effective on these materials since those usually present internal failures like delaminations which are difficult to detect. A miniaturized strain acquisition and wireless transmission system is presented alongside with a novel technique for structural behavior assessment, based on the use of Fiber Bragg Gratings to measure strains and non-supervised classification techniques to recognize different operational conditions. Operational tests were performed on an Unmanned Aerial Vehicles wing's beam, made of composite materials with the sensors embedded during its manufacturing. Strain measurements were processed using an Optimal Baseline Selection methodology. The tests performed proved the system's capability to identify and separate different operational conditions for a healthy structure, based on the analysis of its strain fields. The implementation of this methodologies can lead to perform real-time damage detection on aerospace complex structures made of composite materials.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Structural Health Monitoring Techniques
Advanced Fiber Optic Sensors · Aeroelasticity and Vibration Control