Effect of heating rates on thermal runaway and gas composition in large Li-ion battery cell formats – An experimental study
Cristina Sanfeliu Meliá, Fride Vullum‐Bruer, Mohit Pushp, Christoph Meraner
Norwegian University of Science and Technology SINTEF Energy Research RISE Research Institutes of Sweden
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
The growing use of high-energy lithium-ion batteries for energy storage raises fire safety concerns, especially under high charge/discharge rates or external heating. This work presents an experimental investigation of different heating rates into the thermal runaway behavior of two large cell formats, a 64 Ah NMC pouch cell and a 100 Ah LFP prismatic cell, focusing on key parameters such as surface temperature evolution, propagation time across cell surfaces, total mass loss, gas composition and volume, and total heat release. The tests were conducted in inert atmosphere in a pressurised vessel. Different heating rates, from 4 °C/min to 24 °C/min, and a test with an initial 24 °C/min increase followed by a plateau, were employed for fully charged cells. Results demonstrated for both cells that heating rates influenced the time to reach thermal runaway, the onset temperature, and the maximum temperatures, but had a minor impact on the total gas volume. The gas composition from LFP prismatic cells was found to correlate with the studied heating rates. The findings provide valuable empirical data that support the development of predictive models for thermal runaway initiation and heat propagation in battery modules, contributing to improved safety strategies and system-level design for energy storage applications.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Battery Modeling and Management
Advancements in Battery Materials · Thermal and Kinetic Analysis