The influence of faults on adjacent rock mechanical behavior and acoustic emission characteristics: A case study of the xianshuihe fault zone
Jinxuan Li, Songfeng Guo, Guoxiang Yang, Shengwen Qi
Chinese Academy of Sciences China University of Geosciences (Beijing) Institute of Geology and Geophysics University of Chinese Academy of Sciences
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
A B S T R A C T Tensile strength is a crucial parameter for assessing rock stability and fracture characteristics, which play a significant role in the prediction and engineering design of geohazards. However, fault slip activity can weaken the strength of the surrounding rock mass, thereby influencing its mechanical behavior and failure mode. This study investigates the spatial variation of the tensile strength ( σ t ), compressive strength( σ c ), P-wave velocity ( V p ), and acoustic emission (AE) characteristics at varying distances from the Xianshuihe Fault zone (XSHF), focusing on three representative profiles. The results show that the σ t , σ c , and V p significantly decrease near the fault (0–5 km). Specifically, the relative change rates of σ t , σ c , and V p at approximately 5 km from the fault are 1.55–1.8 times, 1.22–1.86 times, and 1.02–1.25 times greater, respectively, compared to the near-fault zone. As the distance from the fault increases (10–20 km), the rock integrity improves, and the mechanical properties recover. AE monitoring reveals increased microcracks near the fault, with higher b -value and dominant tensile failure modes. Further from the fault, the rock exhibits increased brittleness, and tensile cracking becomes more prevalent. Overall, the mechanical parameters and AE characteristics demonstrate predictable spatial variation with distance, providing valuable insights for identifying stress concentration zones and potential geohazards.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Rock Mechanics and Modeling
earthquake and tectonic studies · Geomechanics and Mining Engineering