Coupled thermomechanical FE model of a railway disc brake for friction material wear calculations
Piotr Grześ, Michał Kuciej
Bialystok University of Technology
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
The article presents a fully coupled 3D thermomechanical model of a railway vehicle disc brake for calculations of temperature, stress, contact pressure and wear distributions. Five specially designed composite organic friction materials associated with a cast-iron ventilated brake disc were analyzed. The performed computer simulations correspond to the operational parameters of braking carried out on a full scale dynamometer test stand at constant braking power and constant vehicle velocity. These conditions were obtained by correcting the clamping force in relation to changes in the coefficient of friction. In the finite element (FE) model of the disc brake, the pad wear depth distribution was determined on the basis of the Archard's law taking into account the specific wear rate, contact pressure and sliding velocity. To create the numerical model with the geometry deformation allowing for friction material loss due to wear, advanced techniques were adapted. The geometric model of the brake includes the complex shapes of the brake pad holder, brake pad and ventilated disc. The wear constants of the tested friction material were obtained by means of the FE simulation and the measurement of the pad weight loss before and after the test on a full scale dynamometer test stand. The distributions of temperature, stresses, contact pressure and accumulated wear depth, obtained from the finite element analysis, in combination with the measured changes in the clamping force and coefficient of friction during braking, enabled to establish relationships between the properties of materials, operational parameters of braking and geometrical features of the brake components.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Brake Systems and Friction Analysis
Railway Engineering and Dynamics · Mechanical stress and fatigue analysis