Superhydrophobic annular pipes: a theoretical study
Darren Crowdy
Imperial College London
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Analytical solutions are presented for longitudinal flow along a superhydrophobic annular pipe where one wall, either the inner or outer, is a fully no-slip boundary while the other is a no-slip wall decorated by a rotationally symmetric pattern of no-shear longitudinal stripes. Formulas are given for the effective slip length associated with laminar flow along the superhydrophobic pipe and the friction properties are characterized. It is shown how these new solutions generalize two solutions to mixed no-slip/no-shear boundary value problems due to Philip (Z. Angew. Math. Phys., vol. 23, 1972, pp. 353–372) for flow in a single-walled superhydrophobic pipe and a superhydrophobic channel. This is done by providing alternative representations of Philip's two solutions, including a useful new formula for the effective slip length for his channel flow solution. For a superhydrophobic annular pipe with inner-wall no-shear patterning there is an optimal pipe bore for enhancing hydrodynamic slip for a given pattern of no-shear stripes. These optimal pipes have a ratio of inner–outer pipe radii in the approximate range 0.5–0.6 and depending only weakly on the geometry of the surface patterning. Boundary point singularities are found to be deleterious to the slip suggesting that, in designing slippery pipes, maximizing the size of uninterrupted no-shear regions is preferable to covering the same surface area with a larger number of smaller no-shear zones. The results add to a list of analytical solutions to mixed boundary value problems relevant to modelling superhydrophobic surfaces.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
材料 / 化学Surface Modification and Superhydrophobicity
Tribology and Lubrication Engineering · Fluid Dynamics and Turbulent Flows